Beginner's Guide: Using a Handheld Steamer For The First Time

When you use a handheld steamer for the first time, you may feel a little overwhelmed. Don't worry, the following guide will help you get started easily.

Preparation

Before using, first check whether the accessories of the steamer are complete and intact, including the main unit, nozzle, water tank, etc. Then, find a suitable space for use, preferably a well-ventilated place with a flat table or clothes hanging rod. Next, prepare the clothes to be ironed and hang them on a stable hanger or clothes hanging rod, so that the clothes can droop naturally, which is convenient for ironing.

Adding water

Adding water to the steamer is a key step. Use clean distilled or purified water, because tap water contains impurities, and long-term use may form scale inside the steamer, affecting its performance and service life. Check the water level mark on the steamer's water tank, add water slowly according to the mark, and be careful not to exceed the highest water level line to avoid water overflow. After adding water, install the water tank back to the steamer, making sure it is firmly installed and there will be no water leakage.

Power on and preheat

Plug the steamer into a suitable socket and turn on the power switch. At this point, the steamer will start preheating. The preheating time for different models of steamers may vary, generally between tens of seconds and several minutes. During the preheating process, you can first familiarize yourself with the grip and operating buttons of the steamer, such as the steam adjustment button (if any).

Start ironing

When the steamer is preheated, you can start ironing the clothes. Hold the steamer in a stable and comfortable position when holding the handle. Keep the nozzle at a proper distance from the clothes, generally about 10-15 cm is recommended. Too close may make the clothes too wet or even burn the clothes; too far away will not be effective for steam removal and wrinkles. Start from the top or one side of the clothes, and move the nozzle slowly and evenly to cover the surface of the clothes with steam. For areas with more or more stubborn wrinkles on the clothes, you can stay for a while or move the nozzle repeatedly several times to allow the steam to fully penetrate the fabric of the clothes. During the ironing process, be careful to avoid the nozzle from contacting buttons, zippers and other hard objects on the clothes to avoid scratching the nozzle.

Pay attention to clothes of different materials

If the clothes are made of delicate materials such as silk and wool, use a lower steam intensity (if there is an adjustable function), keep the nozzle farther away from the clothes, and move faster to avoid damaging the clothes. For clothes that are more resistant to ironing, such as cotton and linen, you can increase the steam intensity and dwell time appropriately.

Finish ironing

When the clothes are ironed, turn off the power switch of the hanging iron first, and then unplug it. After waiting for the hanging iron to cool down, pour out the remaining water in the water tank, and store the hanging iron in a dry and ventilated place for next use.

With the above steps, you can successfully complete the first use of the handheld steam hanging iron and make your clothes look brand new.